Product Description

ACC Switch Cover

Genuine Carling Contura II rocker switch cover labeled “ACC”.  All our covers (called “actuators”) are precision printed with UV stabilized ink.  We only print onto the hard style plastic actuators, not the “soft touch” that melts in the sun and becomes a sticky mess.

This product is the COVER ONLY.  Find an entire replacement ACC Rocker Switch here.

This ACC switch cover will fit on any Carling V-series or contura style switch body or base.  That includes contura style bases sold by Carling, Sierra, Blue Sea Systems, Sea-Dog… or a myriad of other brands.

Actuators are SUPER easy to change out.  Your old covers can be removed easily from the switch body from the front of the panel using this actuator removal tool.  Your new ACC switch cover will pop right back on.  All service done from the front of the panel with NO need to remove the switch (literally a 5 second job here).

How to Determine if it will fit your switches:

1. Check the “will it fit” tab on this page, if your switch looks like any of these styles, it will fit.
2. If your switch has a 4 digit part number on the side (behind panel), starting with a “V” (ex: V1D1), it will fit.
3. If your switch has a removable actuator and is approx: 15/16″ wide and 1 15/16″ tall, it will most likely fit.
4. When in doubt, Contact us and send us a picture of your existing rocker switches and we’ll tell you.
5. Have no fear!  If it does not fit it can be returned for a refund in accordance with our return policies.

Features / Beat the Competition:

• Guarantee – if your ink wears off within 2 years, we’ll replace them for free!
• Genuine Carling Technologies covers – no knock offs
• Durable UV stabilized ink
• Hard cover style.  We never use the “soft touch” style that will melt
• Includes ISO symbol over the lens
• Large format text for easy reading

Contura Styles, lenses and colors:

This ACC rocker cover is a contura II style, as pictured above.  Contura II is the one with the small bumps on it.  We carry printed contura II’s in red and blue lens options (select from menu above).  This ACC rocker cover will have one lens at the top, and is meant to go onto a switch that is illuminated at the top only.

We also carry this label in contura V style here.  This style can be placed onto a two lamp switch, which allows a great backlighting effect for night readability.

Typical use for an ACC Rocker Cover:

ACC is short for accessory.  This actuator is typically added to an unused rocker switch that may later serve a purpose when a new device is added.  It can also be used as a generic label for loads which we may not have covers printed for.  Remember if needed we can customize the contura V style or switch.  So if you find yourself needing too many “ACC” or similar switch covers, let us know and we can design custom actuators for you.