Dual Cup Holder with Phone Slot

Product Description

Dual Cup Holder with Phone Slot

Two drinks and your phone, handled. This surface-mount drink caddy gives you two 3.5″ wells for cans, koozies, and tumblers, plus a slot in the back that stands your phone upright where you can see the chartplotter app, the group text, or the music. It’s fabricated from marine-grade white HDPE in Charleston, SC — no rust, no rot, wipes clean — and it mounts almost anywhere with the four suction cups it ships with.

Two 3.5″ drink wells that fit most cans, koozies, cups, and tumblers up to a 30 oz Yeti, plus a 4″ × 0.65″ slot that stands most phones upright.

Key Features

• Two Drinks + Your Phone – Two 3.5″ drink wells plus a slot that stands a phone upright, all in one caddy.
• Fits Almost Any Cup – The 3.5″ wells take cans, foam koozies, Solo cups, and Tervis- and Yeti-style tumblers up to about 30 oz.
• Phone Slot That Fits Most Phones – The 4″ × 0.65″ slot holds most phones upright, with or without a case.
• Marine-Grade HDPE – White HDPE boat board (comparable to King Starboard) that won’t rot, warp, or corrode, and wipes clean with soap and water.
• Rated for Constant Sun – UV-stabilized marine HDPE that can stay uncovered in direct sunlight for years without fading, chalking, or breaking down — no paint or cover needed.
• Mounts Flat or Vertical – The flat back and included suction cups let you stick it to a horizontal or vertical surface and still move it later — with no mounting-screw holes showing.
• Built & Stocked in Charleston, SC – Fabricated in our own shop and kept in stock, so it usually ships the next business day.

Specifications

• Material: Marine-grade white HDPE boat board (comparable to King Starboard, sometimes called “Starboard”)
• Overall size: 9″ W × 6″ D × 3-1/4″ H
• Drink wells: Two, 3.5″ diameter, about 2-3/4″ deep
• Phone slot: 4″ × 0.65″
• Fits: Cans, koozies, Solo cups, and Tervis- and Yeti-style tumblers up to ~30 oz (a mug with a low handle may not fit)
• Mounting: Four suction cups included — screw them into the base wherever you want (bottom for a flat surface, back for a vertical one). No pre-drilled screw holes; drill and countersink your own if you’d rather screw it down.
• Color: White
• Made in: Charleston, South Carolina, USA

A Phone Slot Instead of a Storage Bin

This is the phone-slot version of our dual cupholder. Where our Dual Cup Holder with Storage Tray puts a catch-all bin between the drinks, this one puts a slot that stands your phone up and angled where you can actually read it in a smaller form factor — no more phone sliding around the dash or face-down in a cup holder you needed for a drink. Two cupholders, one phone, nothing rattling loose.

Mount It Flat, Vertical, or Screw It Down

It comes with four suction cups, and you decide where they go: screw them into the flat base for a horizontal surface like a dash or gunwale, or into the back to hang it on a vertical surface like a console side or cabin bulkhead. The suction cups let you reposition it whenever you want. We left the mounting-screw holes off on purpose — since it can go flat or vertical, we didn’t want to guess and leave holes showing. If you’d rather screw it down permanently, HDPE drills and countersinks easily with common woodworking tools, so add your own holes wherever they suit your install.

About the Suction Cups

Suction cup hold does vary with how clean and un-waxed the surface is. On smooth, clean surfaces the four cups hold this caddy securely and keep it from sliding; on textured or freshly waxed surfaces, hold quality drops. They’re great for keeping it put while still being able to move it — for a permanent hold on a rough ride, screw it down. Many folks buy a few extra cups to add on the back as well. The cups screw into the base with the small screw included with each.

Applications

• Helm and dash within reach of the wheel
• Leaning posts, gunwales, and cockpit seating
• Console sides and cabin bulkheads (vertical mount, use screws)
• Pontoons, bay boats, and center consoles
• Docks, campers, and around the house

What’s Included

• 1 × Dual Cup Holder with Phone Slot (marine-grade white HDPE)
• (add-on) 4 × suction cups, optional (each with its mounting screw) — install where you want them

Frequently Asked Questions:

Want a different cup count, a three-phone layout, or your logo on it? We build custom cupholders and caddies in Charleston. Send us your dimensions.