Pre-made Marine Wire Jumpers

Tired of spending hours on the bench meticulously crimping and heat shrinking jumper wires for your rocker panels? We get it.

Now available, pre-made marine wire jumpers – done right, with all the connection styles you should need.

All tinned marine wire. All adhesive lined heat shrink. Same jumpers we use in our world class switch panels.

Each jumper you’ll find uniquely useful. Order as singles, 10 packs, or 50 packs.

Terminated with 0.250 Female Quick Connects, sometimes with built in piggybacks (as noted below) – these are basically made for rocker panels. All jumpers 4 1/2″ long.

Jumper Part Number Product Key:

12-R-HS-PB – 12AWG, red wire, heat shrink over connections, piggyback on one end. Usually used to daisy-chain breaker source sides. 45A rated wire, will need qty: #of breakers – 1.

14-R-HS-PB – 14AWG, red wire, heat shrink over connections, piggyback on one end. Usually used to daisy-chain breaker source sides on smaller panels. 35A rated wire, will need qty: #of breakers – 1.

14-B-HS-PB – 14AWG, black wire, heat shrink over connections, piggyback on one end. Usually used to daisy-chain negatives on rockers for boats that use black as negatives. Will need qty: #of switches – 1.

14-Y-HS-PB – 14AWG, yellow wire, heat shrink over connections, piggyback on one end. Usually used to daisy-chain negatives on rockers for boats that use yellow as negatives. Will need qty: #of switches – 1.

16-BLU-HS-PB – 16AWG, blue wire, heat shrink over connections, piggyback on one end. Usually used to daisy-chain backlights (T8) on switches with independent lamps. Will need qty: #of switches – 1.

14-R-ST-HS – 14AWG, red wire, heat shrink over connections, straight 0.250″. Usually used to jump from breaker up to switch. 35A rated wire, will need qty: #of switches, 12V, USB’s, etc.

16-R-HS-3CONN – 16AWG, red wire, heat shrink, three 0.250″ connections. Usually used to jump from breaker to double pole switches, like a nav/anc. Minimized piggybacks on switches.

16-B-HS-3CONN – 16AWG, black wire, heat shrink, three 0.250″ connections. Usually used to jump negatives on 10 terminal switches with two negatives. Minimized piggybacks on switches

Key Features:

Quality: Each jumper uses tinned marine wire, adhesive backed heat shrink, insulated terminals, and color coded wire.
Save Time: If you have wired many rocker panels you know how much time making these little puppies will suck from your life.
Repeatable: Make your work shine, with a perfectly repeatable length and style of jumper.