Macerator Rocker Switch Cover
Genuine Carling Contura II covers.
Both Red and Blue Lens Available.
$5.99
Macerator Rocker Switch Cover
Genuine Carling Contura II covers.
Both Red and Blue Lens Available.
Fast Shipping
Expert Support
Easy Returns
Genuine Carling Contura II rocker switch cover labeled “Macerator”. All our covers (called “actuators”) are precision printed with UV stabilized ink. We only print onto the hard style plastic actuators, not the “soft touch” that melts in the sun and becomes a sticky mess.
This product is the COVER ONLY. Find an entire replacement Macerator Rocker Switch here .
This Macerator switch cover will fit on any Carling V-series or contura style switch body or base. That includes contura style bases sold by Carling, Sierra, Blue Sea Systems, Sea-Dog… or a myriad of other brands.
Actuators are SUPER easy to change out. Your old covers can be removed easily from the switch body from the front of the panel using this actuator removal tool. Your new Macerator switch cover will pop right back on. All service done from the front of the panel with NO need to remove the switch (literally a 5 second job here).
This Macerator rocker cover is a contura II style, as pictured above. Contura II is the one with the small bumps on it. We carry printed contura II’s in red and blue lens options (selection from menu above). This macerator switch cover rocker cover will have one lens at the top, and is meant to go onto a switch that is illuminated at the top only.
We also carry this label in contura V style here. Contura V style can be placed onto a two lamp switch, which allows a great backlighting effect for night readability.
These covers are SUPER popular on boats… so if you’ve reached this page 97% chance that yes… it will fit.
Our Contura II and V switch covers are interchangeable on all Carling V-series switches. There are many contura styles (II, III, IV, V, VI, VII, and XIV), which all look slightly different and have a variety of lens colors and looks. This cover will replace them all and is a great way to make your dash look new again.
The easiest way to tell is visually. The most common actuator styles are shown below. If your switches look similar to this, they will fit.
Contura II’s have 8 small bumps at the top and bottom. This is the style we print onto. Lenses can be any variety of colors (white shown here).
Contura III’s have three horizontal lines top and bottom. This style uses a narrow bar lens only.
Contura V style is slightly rounded… shown here surrounded by contura IV style
Contura IV style has a curved almost banana shape to it.
You’ll have to pull the switch out or crawl under the dash to check this, but matching switches will have several markings:
If your switch has any of these markings it will fit.
Feel free to take a photo and email to sales@newwiremarine.com and we’ll tell you if they will fit.
Remember we have a 45 day no-questions-asked return policy. If it does not fit, just return it for a full refund.
You must be logged in to post a review.
Stephen Cook (verified owner) –
Awesome product. Very inexpensive way to refresh your control panel. Definitely get the removal tool. Just slide behind switch cover and gently push straight down, no need to pry. I recommend having a can of compressed air and some q-tip type swabs so you can thoroughly clean the switch once old cover is removed. I wish I replaced those old, gummy covers years ago. Customer service at New Wire Marine is top notch. I called them to confirm the covers would fit. They told me to email pics and they replied within a day and confirmed the new switches would fit. I ordered them that day and the switches arrived 3 days later. Great experience.
Todd Cantrell (verified owner) –
Fast shipping and the switch covers look great.
Bob McElhiney (verified owner) –
rocker covers look great and well made easy to install can in a timely manner! Website was easy to use straight forward.