RigPro X215
$195.00
Mates w/ X2 Mounts
2 breakers & Fuse Block
Shorter Cable
Hardware Included
Fast Shipping
Expert Support
Easy Returns
Product Description
RigPro X215
Meet the RigPro x215: It is our X214 but for single engines
The X215 designed for a system that looks like this (although it can be used for others):
- Single Engine
- 1 Start Battery
- 1 House Battery (or bank) with 1 main house breaker and one additional high-amp breaker.
- 1 fuse block for unswitched loads
- External ACR like this one (optional)
This is the same as our X214, but with a shorter cable that only reaches to switch 2 instead of switch 1.
It works great paired with a X200 (white) or X201 (black) with one 6011, and one 6006 battery switch. One switch will turn on engine and house, the other switch will switch another high amp load, like a stereo amp or electric reel. To charge the house, you’ll either need an external ACR, or the ‘combine’ setting on switch 2 (see example wiring diagram in product photos for details).
This rigging board comes with a two breakers, available in ratings from 50A to 120A. One is intended for main house breaker, and the other for another high amp load like a windlass, stereo amp, etc. It also includes a very useful 6 circuit fuse block with negative bus for those unswitched loads like MFD’s, VHF or other. We’ve also included 6AWG pre-built wire leads to connect it all up!
The X215 seamlessly mates with our X200 (white) or X201 (black) external mounts (sold separately, required for mounting).
It’s easy to install using the same mounting screws that hold the external X200 series recessed battery switch (no additional fasteners visible)
This products comes with a battery link bus commonly needed to parallel house systems or emergency parallels for different combinations of switches.
One of the best things about the X215 (and our entire RigPro series) is its shared mounting system. Forget about ugly finishing washers or awkward glassed in mounting pads – our interior units hang inside using the same screws as the exterior battery switch mounts. Talk about keeping things clean and easy.
The X215, like all our RigPro interior mounts, comes finished with a smooth roundover and an OEM quality finish that’ll make your boat’s interior look like it rolled straight out of the showroom.
Remember, our RigPro line is expandable and customizable, with a whole host of modules to choose from! It’s all about creating the perfect combination for your specific needs.
X215 Dimensions: 15.9″ 4.4″
The X215 is compatible with (and requires for mounting):
And if you don’t find exactly what you’re after, no worries. We’re always ready to craft a custom solution just for you. Just drop us a line (here), or give us a call at (843)894-2337 to chat with a Project Manager today!
