RigPro X211
$162.00
Mates w/ X2 Mounts
2 Breakers w/ longer cable
Choose Rating
Hardware Included
Fast Shipping
Expert Support
Easy Returns
Product Description
RigPro X211
Meet the RigPro x211: It is our double battery switch version of our X111.
The X211 is designed for a system that looks like this (although it can be used for others):
- Twin Engine
- 2 Starting Batteries
- 1 House Battery (or bank) with 1 main breaker
- 1 additional non-separately switched Hi-Amp load
- External ACR (optional, but recommended)
The X211 is a great paired with two 6011 battery switches as shown in product images for this configuration.
This rigging board comes with a two circuit breakers, available in ratings from 50A to 120A. We’ve also included 6AWG pre-built wire leads long enough to connect each breaker to the left battery switch (one is longer than the other).
If you use the X211 as pictured without an ACR, you’d want to manage your house battery underway charging with the “Combine Batteries” setting on the battery switch.
The X211 seamlessly mates with our X200 (white) or X201 (black) external mounts (sold separately, required for mounting).
It’s easy to install using the same mounting screws that hold the external X200 series recessed battery switch (no additional fasteners visible)
This products comes with a battery link bus commonly needed to parallel house systems or emergency parallels for different combinations of switches.
One of the best things about the X211 (and our entire RigPro series) is its shared mounting system. Forget about ugly finishing washers or awkward glassed in mounting pads – our interior units hang inside using the same screws as the exterior battery switch mounts. Talk about keeping things clean and easy.
The X211, like all our RigPro interior mounts, comes finished with a smooth roundover and an OEM quality finish that’ll make your boat’s interior look like it rolled straight out of the showroom.
Remember, our RigPro line is expandable and customizable, with a whole host of modules to choose from! It’s all about creating the perfect combination for your specific needs.
X211 Dimensions: 11.0″ 4.43″
The X211 is compatible with (and requires for mounting):
And if you don’t find exactly what you’re after, no worries. We’re always ready to craft a custom solution just for you. Just drop us a line (here), or give us a call at (843)894-2337 to chat with a Project Manager today!
